Enerzip Natural Gas Generator Sets

Power Range: 625 kVA to 5000 kVA
Equivalent Power Range: 500 kW to 4000 kW at 0.8 power factor
Fuel Options: Natural Gas, Regasified LNG, LPG, Biogas, Coalbed Methane, Sewage Gas, Coal Mine Gas and Other Special Gases
Frequency: 50Hz / 60Hz
Speed: 1500 RPM / 1800 RPM

Enerzip Natural Gas Generator Sets are designed for industrial, commercial and project-based power generation applications where stable gas fuel supply is available. Compared with traditional diesel power systems, gas generator sets can help customers reduce on-site diesel storage requirements, lower exhaust emissions and improve long-term operating economy when suitable gas resources are available.

Enerzip gas power generation solutions can be configured for pipeline natural gas, regasified LNG, LPG, biogas, coalbed methane, sewage gas, coal mine gas and other special gas applications. The final generator configuration should be selected according to gas composition, methane content, calorific value, gas pressure, ambient temperature, altitude, load profile, operating hours and required power mode.

Main Advantages

Wide power range from 625 kVA to 5000 kVA
Equivalent output from 500 kW to 4000 kW at 0.8 power factor
Suitable for 50Hz and 60Hz power systems
Available for 1500 RPM and 1800 RPM applications
Fuel flexibility for natural gas, regasified LNG, LPG, biogas and special gas projects
Lower fuel storage requirements compared with diesel systems
Stable power output for industrial and commercial loads
Suitable for prime power, continuous power, standby power and distributed energy projects
Optional heat recovery system for CHP applications
Lower operating cost when stable gas supply is available
Customized control, cooling, exhaust and gas safety systems available

Enerzip Gas Power Generation Solution

Enerzip gas-fired generator sets are suitable for projects using natural gas, regasified LNG, LPG, biogas, coalbed methane, sewage gas, coal mine gas and other approved gaseous fuels. These systems are widely used in industrial facilities, commercial buildings, oil and gas fields, mining projects, LNG processing plants, hospitals, data centers, sewage treatment plants, agricultural biogas projects and distributed power stations.

Enerzip gas generator sets are not selected only by power rating. For a reliable solution, the gas quality, gas pressure, site environment, load type, motor starting demand, operating mode, cooling conditions, ventilation layout and control requirements must be confirmed before production.

Natural Gas Generator Set Overview

Product Type: Natural Gas Generator Set
Power Range: 625 kVA – 5000 kVA
Equivalent Power Range: 500 kW – 4000 kW
Power Factor: 0.8
Frequency: 50Hz / 60Hz
Speed: 1500 RPM / 1800 RPM
Fuel Type: Natural gas, regasified LNG, LPG, biogas and special gas
Voltage: 400V, 415V, 480V or customized
Application: Prime power, continuous power, standby power and distributed power generation
Configuration: Open type, silent type, containerized type or customized power plant solution

Engine System

Enerzip natural gas generator sets can be configured with project-suitable gas engine platforms such as Cummins, Weichai, Jichai and other approved gas engine options according to power rating, gas quality, fuel availability and project requirements.

The gas engine system is selected based on methane content, calorific value, gas pressure, gas stability and expected running hours. For different projects, Enerzip can provide lean-burn gas engine solutions, gas pressure control, gas safety valves, ignition systems, speed control, protection systems and high-ambient cooling packages.

Engine Features

Reliable industrial gas engine design
Suitable for long-hour power generation applications
Stable performance under properly treated fuel gas conditions
Lower gas consumption under rated working conditions
Factory testing according to confirmed project configuration
Optional automatic lube oil replenishment system
Extended maintenance planning according to engine model and gas quality
Customized gas supply and protection system available

Alternator System

Enerzip gas generator sets can be matched with international or Chinese alternator brands according to project requirements. The alternator is selected to match engine output, voltage requirement, load characteristics, motor starting demand and site working conditions.

Alternator Features

Brushless alternator design
High-efficiency power generation
Suitable for industrial motor starting applications
IP23 protection available
Class H insulation available
Voltage options can be customized
PMG excitation system optional for special applications
Anti-condensation heater optional for humid environments

Control System

Enerzip gas generator sets can be equipped with advanced control modules for generator protection, power management and monitoring. For single-unit and multi-unit projects, the control system can support automatic start/stop, load monitoring, alarm protection, remote control and paralleling operation.

Control System Options

Generator start and stop control
Voltage, frequency, current and power monitoring
Engine protection and alarm functions
Emergency stop protection
Event log and running hours record
Remote monitoring interface
RS485, Ethernet, 4G or other communication options
Synchronization and paralleling control for multiple generator sets
ATS, distribution cabinet and power management system optional

Cooling and Exhaust System

Enerzip can configure the cooling system according to ambient temperature, altitude, installation space and ventilation conditions. For hot climates, containerized units or long-hour operation, cooling capacity, radiator layout and air flow should be confirmed before production.

Cooling and Exhaust Options

High-ambient radiator package
Remote radiator option
Heat exchanger option
Exhaust silencer
Exhaust bellows and flexible connection
Waste heat recovery option for CHP projects
Cylinder jacket water heat recovery optional
Exhaust heat recovery optional for energy reuse

CHP and Heat Recovery Options

For projects requiring higher energy utilization, Enerzip can provide gas generator set solutions with optional CHP configuration. Waste heat from jacket water and exhaust gas can be recovered for hot water, process heating or other thermal applications, depending on the site design and customer requirements.

Typical CHP applications include industrial plants, commercial buildings, hospitals, biogas projects, sewage treatment plants, food processing facilities and distributed energy stations.

Design and Project Configuration

Enerzip gas generator sets can be configured according to customer site conditions and project requirements. The generator system can be designed for open installation, soundproof enclosure, containerized power station, distributed energy system or CHP application.

Design References

Generator set design can be configured according to applicable ISO 8528 requirements
Emergency standby projects can refer to NFPA 110 where applicable
Electrical system can be customized according to local voltage and frequency
Cooling system can be designed for high ambient temperature conditions
Gas safety system should be configured according to actual gas supply conditions and local regulations

Quality and Testing

Before shipment, Enerzip checks the generator set according to confirmed order requirements. Inspection can include engine and alternator configuration, controller settings, protection functions, wiring layout, cooling system, gas system interface, fuel safety items, enclosure condition and overall power system configuration.

Enerzip focuses on practical configuration, project matching and long-term technical support. The final gas generator solution should be confirmed based on gas quality, load profile, running hours, installation type, cooling conditions, ventilation, noise limit, maintenance access and control requirements.

Applications

Enerzip natural gas generator sets are suitable for:

Industrial facilities
Commercial buildings
Oil and gas fields
Mining sites
LNG processing plants
Gas power stations
Hospitals and emergency power systems
Data centers
Manufacturing plants
Biogas projects
Sewage treatment plants
Coal mine gas utilization projects
Agricultural and landfill biogas projects
Distributed energy and CHP projects

Information Required for Quotation

To recommend the correct natural gas generator set, please provide:

Required power: kW / kVA
Frequency: 50Hz or 60Hz
Voltage and phase
Application: standby, prime, continuous or CHP
Gas type and gas composition
Methane content or calorific value
Gas pressure
Ambient temperature and altitude
Running hours per day
Load type and largest motor load
Installation type: open, silent or containerized
ATS, paralleling or remote monitoring requirement
Heat recovery requirement if any

Enerzip can provide customized natural gas generator set solutions for industrial power, distributed energy, biogas utilization and special gas power generation projects.